Protected _nativeOptional index: numberOptional type: numberOptional index: numberGets/sets the number of rows that will be shown in a ListView. You should update this property after each data operation.
= 0]
0.1
Gets/sets height of a row in a ListView. Once you created the ListView, you can't change row height. If you want to change height of row dynamically, use onRowHeight callback instead.
0.1
Gets/sets the visibility of vertical scroll bar of ListView. If set to true, scroll bar will be shown otherwise scroll bar will be hidden.
= false]
0.1
If the value of this property is YES , scrolling is enabled, and if it is NO , scrolling is disabled. The default is YES.
= true]
3.2.0
Enables/disables the refresh function of ListView. If set to false onPullRefresh events will not be called.
= true]
0.1
Enables/disables drag & drop behavior. When rowMoveEnabled property is true, onRowSelected callback is not triggered for iOS.
= false]
4.1.4
When UI.ListView#rowMoveEnabled rowMoveEnabled is true, default value is true but you may want to disable this if you want to start dragging on a custom view touch using UI.ListView#startDrag startDrag.
= false]
4.1.4
Enables the swiping behavior. For iOS, this property changes leftToRightSwipeEnabled and rightToLeftSwipeEnabled properties.
= false]
4.1.4
Gets contentOffset of the ListView.
return.x
return.y
3.1.3
Readonly x: numberReadonly y: numberThis event is called when a ListView is scrolling. To remove this evet, set null. For better performance, don't set any callback if does not necessary
onScroll
0.1
Gets/Sets contentInset of the ListView.
= {top: 0,bottom: 0}]
3.0.2
Static SwipeStatic iOSStatic SwipeSets/gets top-start corner radius of a view.
= -1]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderTopStartRadius is available on Android.
Sets/gets top-end corner radius of a view.
= -1]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderTopEndRadius is available on Android.
Sets/gets bottom-start corner radius of a view.
= -1]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderBottomStartRadius is available on Android.
Sets/gets bottom-end corner radius of a view.
= -1]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderBottomEndRadius is available on Android.
The color of the shadow. UI.View.ios#masksToBounds property must be false for shadow on iOS. On Android, this property only works on Android 9 and above.
= UI.Color.BLACK]
5.0.3
Gets/sets the transitionId to be used for transitionViews. See transitionViews for more information
0.1
Gets/sets whether the view is an accessibility element that an assistive app can access.
UI.View
4.3.2
A content description briefly describes the view. VoiceOver will read this string when a user selects the associated element.
UI.View
4.3.2
Defines the opacity of a view. The value of this property is a float number between 0.0 and 1.0. 0 represents view is completely transparent and 1 represents view is completely opaque.
= 1]
UI.View
0.1
Gets/sets background color of a view. It allows setting background color with UI.Color instance.
= UI.Color.WHITE]
UI.View
0.1
Sets/gets border color of bounded view.
= UI.Color.BLACK]
0.1
Sets/gets border thickness of bounded view. Accepts unsigned numbers, 0 means no border.
= 0]
0.1
Sets/gets corner radius of a view. BorderRadius maximum value must be half of the shortest edge.
= 0]
0.1
Sets/gets top-left corner radius of a view.
= 0]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderTopLeftRadius is available on Android.
Sets/gets top-right corner radius of a view.
= 0]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderTopRightRadius is available on Android.
Sets/gets bottom-right corner radius of a view.
= 0]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderBottomRightRadius is available on Android.
Sets/gets bottom-left corner radius of a view.
= 0]
5.0.3
since 5.1.1 Use the borderRadiusEdges property instead. Also android.borderBottomLeftRadius is available on Android.
Gets/sets id of a view. It should be unique number for each object inside page. Id will be generated unique by default.
UI.View
0.1
Gets/sets test id for view. resource-id for android; accessibilityIdentifier for iOS.
UI.View
4.3.2
Gets/sets visibility of view. It is set to true as default.
= true]
UI.View
0.1
Gets/sets the degrees that the view is rotated around the pivot point.
= 0]
UI.View
1.1.10
Gets/sets the degrees that the view is rotated around the horizontal axis through the pivot point. RotationX works different for iOS and Android. Android gives perpective to the view but iOS doesn't. This will cause difference on user interface.
= 0]
UI.View
1.1.10
Gets/sets the degrees that the view is rotated around the vertical axis through the pivot point. RotationY works different for iOS and Android. Android gives perpective to the view but iOS doesn't. This will cause difference on user interface.
= 0]
UI.View
1.1.10
Enables/disables touches to view. When set to false events related to touches won't fire. It is set to true as default.
= true]
UI.View
0.1
Gets/sets left position of a view relative to its parent.
= 0]
0.1
Gets/sets top position of a view relative to its parent.
= 0]
0.1
Gets/sets right position of a view relative to its parent. This property works only if view's positionType is UI.FlexLayout.PositionType.ABSOLUTE.
= 0]
0.1
Gets/sets bottom position of a view relative to its parent. This property works only if view's positionType is UI.FlexLayout.PositionType.ABSOLUTE.
= 0]
0.1
Gets/sets height of a view.
= 0]
0.1
Gets/sets width of a view.
= 0]
0.1
Gets/sets minimum width of a view.
= 0]
0.1
Gets/sets minimum height of a view.
= 0]
0.1
Gets/sets maximum width of a view.
= 0]
0.1
Gets/sets maximum height of a view.
= 0]
0.1
Gets/Sets the padding space on the top side of a view.
= 0]
0.1
Gets/Sets the padding space on the bottom side of a view.
= 0]
0.1
Gets/Sets the padding space on the left side of a view.
= 0]
0.1
Gets/Sets the padding space on the right side of a view.
= 0]
0.1
Gets/Sets the padding space on the all sides of a view.
= 0]
0.1
Gets/Sets the margin space on the top side of a view.
= 0]
0.1
Gets/Sets the margin space on the bottom side of a view.
= 0]
0.1
Gets/Sets the margin space on the left side of a view.
= 0]
0.1
Gets/Sets the margin space required on the right side of a view.
= 0]
0.1
Gets/Sets the margin space required on the all sides of a view.
= 0]
0.1
This property specifies the type of positioning method used for a view. To position a view relative to its parent with top,left,right and bottom properties you must set the position type to absolute.
= UI.FlexLayout.PositionType.RELATIVE]
0.1
This property specifies how much a view will grow relative to the other views inside the same UI.FlexLayout FlexLayout.
= 0]
0.1
AspectRatio keeps the ratio between the width and the height of a view. AspectRatio has higher priority than UI.View#flexGrow flexGrow.
0.1
This property specifies how much a view will shrink relative to the other views inside the same UI.FlexLayout FlexLayout.
= 1]
0.1
This property specifies the initial length of a view in a UI.FlexLayout FlexLayout.
= -1]
0.1
This property sets the amount that the view is scaled in X & Y around the pivot point, as a proportion of the view's unscaled width. A value of 1 means that no scaling is applied. Actually UI.flipVertically flipVertically & UI.flipHorizontally flipHorizontally functions are assignes -1 to X & Y to mirror the view. So while using scale, need to consider these functions.
4.0.1
This property specifies how a child view aligns in the cross-axis. It overrides the UI.FlexLayout.AlignItems FlexLayout.AlignItems property of the parent.
= UI.FlexLayout.AlignSelf.AUTO]
0.1
A Boolean indicating whether sublayers are clipped to the layer’s bounds. Android sublayers still overlaps the border's width and as known issue,if UI.View#maskedBorders maskedBorders is used then sublayer won't be clipped.
= true]
4.1.4
Specified enums indicates that which corner of View will have radius.
= [View.Border.TOP_LEFT, View.Border.TOP_RIGHT, View.Border.BOTTOM_RIGHT, View.Border.BOTTOM_LEFT]]
4.1.4
since 5.0.3 Use the borderRadiusEdges properties instead.
A Boolean indicating whether sublayers are clipped to the layer’s bounds. Android sublayers still overlaps the border's width and as known issue,if UI.View#borderRadiusEdges borderRadiusEdges is used then sublayer won't be clipped.
= {topLeft: true, topRight: true, bottomLeft: true, bottomRight: true}]
5.1.1
Static Readonly BorderProtected preProtected addProtected addIOSPropsSets the colors used in the refresh animation. On Android the first color will also be the color of the bar that grows in response to a user swipe gesture. iOS uses only the first color of the array.
setPullRefreshColors
0.1
This method notify the ListView that given range of items deleted. Must set the itemCount value to a changed number before calling this function. For iOS, If you want to make multiple changes (insert, delete, refresh) as a single animation, you should use {UI.ListView#performBatchUpdates performBatchUpdates}.
deleteRowRange
4.1.4
This method notify the ListView that given range of items inserted. Must set the itemCount value to a changed number before calling this function. For iOS, If you want to make multiple changes (insert, delete, refresh) as a single animation, you should use {UI.ListView#performBatchUpdates performBatchUpdates}.
insertRowRange
4.1.4
This method notify the ListView that given range of items changed. For iOS, If you want to make multiple changes (insert, delete, refresh) as a single animation, you should use {UI.ListView#performBatchUpdates performBatchUpdates}.
refreshRowRange
4.1.4
Optional ios?: { animation: RowAnimation }Creates an event emitter instance to listen for the actions
Call the function to remove the event
Gets as any arguments as it needs
Optional newState: ScrollStateOptional contentOffset: Point2DRest ...args: any[]Removes the specified event and invokes the callback after it is removed
Optional newState: ScrollStateOptional contentOffset: Point2DRest ...args: any[]Triggers the event manually.
Optional newState: ScrollStateOptional contentOffset: Point2DRest ...args: any[]Creates an event emitter instance to listen for the actions
Call the function to remove the event
Gets as any arguments as it needs
Optional newState: ScrollStateOptional contentOffset: Point2DRest ...args: any[]Adds the listener function to the beginning of the listeners array for the event named eventName. No checks are made to see if the listener has already been added. Multiple calls passing the same combination of eventName and listener will result in the listener being added, and called, multiple times.
Optional newState: ScrollStateOptional contentOffset: Point2DRest ...args: any[]Adds a one-time listener function for the event named eventName to the beginning of the listeners array. The next time eventName is triggered, this listener is removed, and then invoked.
Optional newState: ScrollStateOptional contentOffset: Point2DRest ...args: any[]Protected createCall this when something has changed which has invalidated the layout of this view. This will schedule a layout pass of the view tree. It is useful to call this method when you want to change layout parameters on runtime. If this view layout invalidated, call applyLayout from the Page.layout in the iOS and from the view itself in the Android.
applyLayout
This method returns an object that defines view location on screen. Do not use this method for invisible views in UI.ListView ListView and UI.GridView GridView.
getScreenLocation
location
location.x
location.y
3.2.0
Gets the parent view of a view.
import FlexLayout from '@smartface/native/ui/flexlayout';
import Label from '@smartface/native/ui/label';
var myFlexLayout = new FlexLayout();
myFlexLayout.id = 5432;
var myLabel = new Label({
text: "Smartface Label"
});
myFlexLayout.addChild(myLabel);
var parentId = myLabel.getParent().id; //is equal to 5432.
Parent view of a view, null if not exists.
getParent
0.1
Optional params: Partial<TProps>Generated using TypeDoc
Since
0.1
Example